This is the authors' abstract. We don't add key points for this paper.
Flexible transparent conductive thin films (TCFs) that combine low cost, high conductivity, and environmental stability are important for next-generation optoelectronic devices. Here, MoO 3 /Cu/MoO 3 (MCM) multilayer TCFs were deposited on polyethylene terephthalate (PET) substrates by room-temperature magnetron sputtering. The embedded Cu interlayer provides efficient in-plane electron transport, whereas the amorphous MoO 3 layers contribute to optical regulation and improve the environmental and interfacial stability of the embedded Cu layer. By optimizing the Cu and MoO 3 thicknesses, the MCM thin film containing an 11 nm Cu interlayer and two 30 nm MoO 3 layers achieved a transmittance of 81.6%, a sheet resistance of 9.9 Ω/sq, and a maximum figure of merit of 9.7 × 10 −3 Ω −1 . As the Cu thickness increased, electrical transport evolved from island-dominated tunneling/percolation to continuous metallic conduction. The MCM architecture also exhibited substantially improved resistance to tape peeling, ultrasonication, cyclic bending, oxidation, sulfidation, humidity aging, thermal treatment, and ambient storage. These results demonstrate the potential of room-temperature-fabricated MCM multilayers as stable, low-cost flexible transparent electrodes.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Song et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: