Answers are grounded in this paper and cite their sources.
High‐performance porous ceramics combining excellent thermal insulation performance, high‐temperature stability, and mechanical robustness are urgently needed for extreme environments. In this work, hierarchically TiN–Ti 3 O 5 porous ceramic (TTPC) was fabricated via a foam gel‐casting combined with carbothermal reduction strategy. Benefiting from their hierarchically pore architecture, the TTPCs prepared at 1300°C exhibited a high porosity of 87.2%, a high compressive strength of 3.27 MPa, and a low thermal conductivity of 0.182 W·m −1 ·K −1 . Notably, the TTPCs maintained a high‐temperature compressive strength of over 4.5 MPa at 1000°C in an Ar atmosphere (porosity of 80.5%), demonstrating their excellent mechanical reliability at elevated temperatures. When exposed to an alcohol blowtorch (∼1101.8°C), the ceramic exhibited no shrinkage or cracking, maintaining a large temperature gradient of ∼872.8°C between the fired and cold sides. Furthermore, after re‐heating in an inert Ar atmosphere at 1300°C for 10 h, the TTPCs retained their original microstructure and phase composition, demonstrating an excellent high‐temperature stability. These results highlight TTPCs as promising multifunctional materials for high‐temperature thermal insulation and demonstrate a simple and effective strategy for fabricating robust, thermally insulating non‐oxide porous ceramics for use in harsh high‐temperature environments.
No takes yet. Share an insight, caveat, or question.
Gao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: