Answers are grounded in this paper and cite their sources.
Polyamide (PA) thin-film composite nanofiltration (NF) membranes are widely used in water treatment, yet the strongly coupled relationships among pore structure, crosslinking density, surface charge, and hydrophilicity of the PA selective layer hinder the simultaneous improvement of permeance, selectivity, and anti-scaling stability. Herein, we developed a facile hot sulfuric acid (SA) post-treatment strategy to tailor the PA selective layer of commercial NF270 membranes. Treatment with 20 wt% H 2 SO 4 at 60°C promoted acid-catalyzed hydrolysis and chain rearrangement in the PA network, generating ionizable oxygen-containing groups, strengthening the surface negative charge, enhancing hydrophilicity, and moderately enlarging effective transport channels. The resulting membrane (NFM-SA60) exhibited a water permeance approximately 1.84 times that of the pristine membrane while maintaining favorable Na 2 SO 4 and dissolved organic carbon rejections. In addition, NFM-SA60 showed a markedly reduced flux decline and a flux recovery ratio of 92% after three CaSO 4 scaling-cleaning cycles, far exceeding those of the pristine and reference membranes. The improved anti-scaling behavior was attributed to the strengthened hydration layer and intensified electrostatic repulsion, which jointly suppressed Ca 2+ /SO 4 2- adsorption and heterogeneous nucleation on the membrane surface. This work provides a simple and scalable acid-thermal post-treatment route for regulating PA NF selective layers and offers mechanistic insights into balancing permeance, selectivity, and long-term anti-scaling stability in advanced water treatment.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: