Answers are grounded in this paper and cite their sources.
Reverse electrowetting is a well-known technique used for energy conversion. However, it requires an external bias voltage. This work proposes and experimentally demonstrates a novel method of mechanical to electrical-energy conversion based on a combination of reverse electrowetting (REWOD) and Faraday’s law of electromagnetic induction. The new method uses inductively generated voltage to power the reverse electrowetting system, thus eliminating the need for an external bias voltage source. The electromagnetic system is coupled with REWOD in two different configurations: a) directly connected utilizing alternating current and b) with a rectification circuit utilizing direct current. The alternating current method produces an average power of about 22% as compared to the REWOD with an external bias voltage source. This decrease in power appears due to the polarity-sensitive charge trapping in thin Ta2O5 dielectric film. When the rectification circuit is used, the combined system achieved the same average power as that produced by REWOD with an external bias voltage source. Further, a novel parametric resonance approach to energy generation is proposed. Using the parametric resonance method the power of the system can be potentially increased by a factor of up to 104 as compared to the traditional REWOD system. Thus, this study shows that the combined energy harvesting method substantially improves the REWOD approach at the same time eliminating one of its most important shortcomings — the need for an external bias voltage source.
No takes yet. Share an insight, caveat, or question.
Gupta et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: