Answers are grounded in this paper and cite their sources.
From a numerical and experimental analysis, this study demonstrates the enhancement of Raphanus sativus seed germination using an automated system and an ultrasound pretreatment based on commercial equipment operating at 40 kHz and 1.5 MPa. The finite element method (FEM) was used to solve the coupled wave and heat transfer equations, enabling the spatial and temporal characterization of the thermo-acoustic effect. Numerical results show that ultrasonic exposure, even at durations up to 40 min, does not cause thermal or mechanical damage to the seeds, as the temperature remains below 40 ∘ C and the acoustic rupture force does not exceed 18.28 ± 2.92 N. In parallel, an experimental procedure was conducted with ultrasound treatments of 5 to 40 min to establish a baseline and identify the optimal exposure time. A 5-minute treatment achieved a 100% germination rate, indicating that short-duration ultrasound effectively enhances germination. Under these conditions, the energy and water consumption of a manually rinsed process involving ultrasound-treated seeds was quantified, resulting in 1.752 kWh of energy use and 15000 mL of water consumption. To improve efficiency, an automated system was developed, maintaining the 100% germination rate while reducing water consumption by a factor of 20 and using a similar amount of energy (1.790 kWh). The integration of numerical modeling, ultrasound pretreatment, and automation offers a scalable and sustainable alternative to traditional germination, optimizing water and energy use without compromising results. This approach addresses key agricultural challenges related to resource scarcity and climate resilience.
No takes yet. Share an insight, caveat, or question.
Aguilar-Torres et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: