Answers are grounded in this paper and cite their sources.
The recombination of photogenerated charge carriers at metal-semiconductor interfaces remains a major source of efficiency loss in photovoltaic cells. Here, we present SiNxand AlOxnanolayers as promising interface dielectrics to enable high efficiency hole selective passivating contacts. It is demonstrated that SiNxdeposited via direct plasma enhanced chemical vapour deposition can be grown controllably at thicknesses of 2 nm. The valence band offsets between crystalline silicon and ultrathin AlOxand SiNxnanolayers are measured as 3.5 and 1.4 eV, respectively. This predicts a larger tunnelling current for holes, compared to SiOxused typically. Resistivity measurements show that SiNxand AlOxnanolayers have lower contact resistivities compared to SiOx, with values as low as 100 mΩ·cm2. Analysis of the current transport mechanisms confirmed that tunnelling dominates the conduction through SiNx, while a mixture of tunnelling and pinholes are present in the AlOxstructure. Lifetime measurements gave initial indications of the passivation quality of the films, with just 10 cycles of AlOxachieving 260μs after annealing and 1.9 ms with extrinsic field effect passivation added. Finally, the intrinsic built-in charge in the dielectrics was determined using surface photovoltage measurements and simulations are used to estimate the influence of nanolayer built-in charge in both poly-Si and dopant-free passivating contacts to enable future high efficiency solar cells.
No takes yet. Share an insight, caveat, or question.
McNab et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: