Answers are grounded in this paper and cite their sources.
Laser powder bed fusion (LPBF) offers considerable flexibility in tailoring the geometry and microstructure of metallic components. However, process-induced defects, particularly keyhole porosity, are generally regarded as detrimental and are therefore suppressed whenever possible. For LPBF-fabricated moulds and dies requiring localised thermal management, this raises the possibility of using such defects in a controlled manner to reduce through-thickness heat transfer. In this study, a defect-enabled layered keyhole architecture was developed in LPBF-fabricated 18Ni300 steel by spatially organising keyhole pores into discrete bands. Using the hollow morphology of polar bear hair as a conceptual analogy, a standard hatch scan followed by local short-vector remelting was employed to introduce keyhole-containing bands within an otherwise comparatively dense metallic matrix. Preliminary screening identified 50 µm as the best-performing short-vector length within the investigated range. Thermal simulations and experiments consistently showed that the effective through-thickness thermal conductivity decreased from 23.9 to 20.6 m − ¹ K − ¹ as the number of bands increased from one to four, corresponding to a reduction of approximately 14%. At comparable overall porosity, the six-band layered specimen exhibited an effective through-thickness thermal conductivity approximately 9.3% lower than that of the randomly porous specimen. Local electron backscatter diffraction observations revealed grain refinement in the keyhole-affected zone, where the average grain size decreased from 3.07 µm to 0.74 µm and the kernel average misorientation increased from 0.40° to 0.51°. The global compressive response remained comparatively tolerant within the tested range, whereas supplementary tensile tests showed greater reductions in strength and ductility with increasing band number. These results demonstrate that spatially controlled keyhole porosity can serve as a functional internal feature for introducing local through-thickness thermal resistance in as-built LPBF-fabricated 18Ni300 steel, with potential relevance to localised thermal management in moulds and dies.
No takes yet. Share an insight, caveat, or question.
辛佳瑞 et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: