Answers are grounded in this paper and cite their sources.
The elevated-temperature fretting wear behavior of high-entropy alloy (HEA) coatings synergistically strengthened by trace refractory elements (V, Nb, Mo, W) and TiC, and modified with trace B, was investigated. (FeCrCoNi) 80 Cu 10 B 2 TiC 5 and nine (FeCrCoNi) 80 Al 10 -based HEA coatings doped with B, TiC, and different refractory elements were fabricated on 316 stainless steel substrates by laser cladding. The phase constitution of the coatings was precisely regulated by controlling the contents of the trace refractory elements and TiC. Trace B was introduced to improve the lubrication condition during elevated-temperature fretting, thereby contributing to synergistic strengthening. A quantitative full‑process dissipated energy (FDE) method was used to characterize the complete fretting wear behavior, and the evolution of surface damage was systematically analyzed. The results showed that the BTC-Mo3 coating exhibited markedly superior fretting wear resistance at both ambient and elevated temperatures. Compared with the substrate, its wear volume decreased by 89.71% at ambient temperature and by 93.07% at elevated temperature. TiC particles served as heterogeneous nucleation sites for Mo segregation; the segregated Mo promoted preferential nucleation of the BCC phase adjacent to TiC and subsequent intragranular growth, driving the transformation from FCC to BCC. This yielded a composite BCC–TiC structure with a high hardness of 718 HV and substantially improved fretting wear resistance. This compositional design enriched the elevated temperature strengthening mechanisms of HEA coatings and offered a new strategy for optimizing their elevated‑temperature fretting wear resistance.
No takes yet. Share an insight, caveat, or question.
Song et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: