Answers are grounded in this paper and cite their sources.
Waste poly(ethylene terephthalate) textiles offer a porous scaffold for electrode construction, but their low electrical conductivity limits direct electrochemical use. Sequential modification with a conductive polymer/carbon coating and copper was designed to integrate charge transport and catalytic functionality on these textile substrates. A polyaniline/carbon layer was prepared by ultrasound-assisted oxidative polymerization, followed by secondary polyaniline electrodeposition and copper deposition. The addition of 4,4′-diaminodiphenyl disulfide was associated with detectable sulfur-related chemical states and a decrease in interfacial resistance at an appropriate dosage. The sequential polymer/carbon coating and secondary polyaniline deposition reduced the fitted charge-transfer resistance from 1843 Ω for the untreated textile to 598.5 Ω before copper deposition. In an H-type cell, the copper-modified electrode exhibited potential-dependent nitrate electroreduction, reaching a mean ammonia Faradaic efficiency of 95.13 ± 1.64% at −0.79 V versus the reversible hydrogen electrode after 1000 s. Neither NH₃–N nor NO₂⁻–N was detected for the copper-free control under the tested conditions, supporting the contribution of copper modification to product formation. These results demonstrate the feasibility of using post-use textile scaffolds for conductive-interface construction and subsequent catalytic functionalization, providing a materials-reuse approach to nitrate electroreduction.
No takes yet. Share an insight, caveat, or question.
Yan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: