This is the authors' abstract. We don't add key points for this paper.
Modern industrial systems and biomass-fired furnaces require surface treatments that can withstand aggressive chemical, thermal, and corrosive environments. This study investigates the corrosion and thermal resistance of plasma-sprayed Al2O3-TiO2 coatings produced using a DC air–hydrogen plasma spray process. Coatings of compositions of Al2O3, Al2O3-3 wt.% TiO2, Al2O3-13 wt.% TiO2, and Al2O3-40 wt.% TiO2 were deposited on steel substrates with a Ni/Cr bond layer by plasma spraying. The coatings were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) to evaluate their morphology, elemental composition, and crystalline phases. Electrochemical tests were performed in a naturally aerated 0.5 mol/L NaCl solution and cyclic thermal–chemical exposure tests (500 °C using 35% KCl) to assess their corrosion kinetics and thermal stability. The results indicate that pure Al2O3 and low TiO2 (3 wt.%) coatings exhibit fine barrier properties, while coatings with a higher TiO2 content develop additional phases (e.g., Ti3O5, Al2TiO5) that improve thermal resistance but reduce chemical durability.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Grigaitienė et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: