Answers are grounded in this paper and cite their sources.
This paper introduces a nano-power, voltage-mode versatile first-order universal filter that employs a single differential difference transconductance amplifier (DDTA). Ultra-low-voltage and low-power operation is achieved by biasing the DDTA transistors in the subthreshold region, while employing a multiple-input bulk-driven (MI-BD) technique to handle multiple signals on a single differential pair, thereby eliminating the need for redundant differential stages. Acting as a multiple-input multiple-output (MIMO) topology, the proposed circuit simultaneously delivers six fundamental filtering functions—covering non-inverting and inverting variants of low-pass, high-pass, and all-pass responses—while offering independent electronic control over the pole frequency. To demonstrate practical utility, two non-inverting all-pass filter blocks are combined with a voltage-gain amplifier to construct a functional quadrature oscillator. SPICE simulations in a 0.18-µm CMOS process demonstrate that the filter operates reliably from a 0.5-V supply, consuming only 97 nW of power while achieving a dynamic range of 59.41 dB at a pole frequency of 250 Hz. Finally, experimental results from a commercially available LM13700-based prototype demonstrate the functional topology and tuning capabilities, while full validation of the ultra-low-power operation is reserved for integrated CMOS realization.
No takes yet. Share an insight, caveat, or question.
Kumngern et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: