Answers are grounded in this paper and cite their sources.
In lead-cooled fast reactors (LFRs), the temperature difference between hot and cold lead–bismuth eutectic (LBE) streams from different fuel assemblies can exceed 100 K. Their interaction in the upper plenum generates complex turbulent jets, which may cause thermal striping and thermal fatigue in structural components, making thermal mixing critical to reactor safety. Conventional RANS methods struggle to reliably capture transient temperature fluctuations, while pure LES incurs prohibitively high computational cost for multi-condition engineering studies. Detached eddy simulation (DES), which combines near-wall Reynolds-averaged Navier–Stokes modeling with large eddy simulation in separated regions, strikes a practical balance between eddy-resolving capability and computational efficiency, providing an efficient approach for resolving large-scale turbulent structures and temperature fluctuations. In this study, DES was used to investigate the thermal mixing of hot and cold LBE coolant jets in a parallel triple-jet configuration. The method was validated against liquid-sodium triple-jet experimental data and then applied to examine the effects of inlet velocity and temperature difference. The results show that higher inlet velocity enhances jet inertia, delays near-inlet mixing, and broadens the frequency range of temperature fluctuations, whereas a larger temperature difference mainly increases temperature gradients and fluctuation intensity, with little influence on the overall flow structure and dominant frequency range. A reference comparison with LES data further demonstrates that DES can reproduce the overall dependence of temperature fluctuation intensity on the operating parameters with comparable fluctuation amplitude ranges, while requiring approximately 94 % lower estimated computational cost.
No takes yet. Share an insight, caveat, or question.
Qiao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: