This is the authors' abstract. We don't add key points for this paper.
Helical piles are widely applied in building, power, and offshore foundation engineering owing to their excellent uplift resistance in recent year. To improve the uplift bearing performance of helical piles, three field tests of uplift loading were conducted on helical pile embedded in silty clay to compare the uplift bearing capacities before and after grouting. The earth pressure and pore water pressure changes during the pile installation, grouting and static loading were measured to analyze the grouting-induced soil response. An elliptical sliding surface model was further extended to estimate the uplift capacity of post-grouted helical piles and discuss the sensitivity of post-grouting strength parameters. The results show that pile installation and grouting generate pronounced radial disturbance zones, with the influence zone of earth pressure and pore water pressure extending to approximately 4 times of helix diameter. During helical pile installation, the variations in earth pressure and pore water pressure along the pile shaft are predominantly governed by the penetration depth of the pile tip and helix. During grouting stage, these pressure responses are primarily dependent on grouting parameters and soil properties. The uplift capacity of helical piles can be improved by 0.68∼4.33 times by the post-grouted technique. Post-grouting significantly improves the force and deformation response mechanism at the pile-soil interface. The elliptical sliding surface model can predict the uplift capacities of post-grouted helical piles, and demonstrates that the uncertainty post-grouting strength parameters is important for the engineering design.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Zhong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: