Answers are grounded in this paper and cite their sources.
Zr-based bulk metallic glasses (Zr-BMGs) have attracted considerable attention for biomedical applications owing to their unique amorphous structure, excellent corrosion resistance, and high hardness. However, their limited wear resistance remains a major challenge for their application in artificial joint implants. In this study, femtosecond laser processing was employed to fabricate surface microtextures on medical Zr-based metallic glass, and a systematic investigation was conducted to optimize the processing parameters and evaluate the resulting surface properties. First, an improved multi-objective vulture optimization algorithm was developed to optimize laser power, scan times, and scan speed, with groove depth and bottom-surface roughness selected as the optimization objectives. The optimized parameters were experimentally validated, and the experimental results showed good agreement with the predicted optimization results. Subsequently, the optimized processing parameters were applied to fabricate micropits and hexagonal protrusions, thereby evaluating their applicability to different microtexture geometries. Reciprocating friction and wear tests demonstrated that microtexture geometry and spacing significantly affected the tribological performance. Among the investigated structures, microgrooves with a spacing of 100 μm exhibited the lowest coefficient of friction, reducing friction by approximately 53 % compared with the untextured surface, and showed superior tribological performance to micropits and hexagonal protrusions. Furthermore, the effects of microtexture fabrication on surface wettability, microhardness, and biocompatibility were systematically investigated. Femtosecond laser processing significantly improved surface hydrophilicity, while the surface microhardness exhibited a slight increase and the microtextured surfaces maintained good cytocompatibility. Overall, this study demonstrates that optimized laser processing parameters and microtexture design can substantially enhance the wear resistance, surface wettability, and mechanical properties of zirconium-based amorphous alloys for medical applications. It provides novel design insights for biomedical applications and offers reference for surface modification of other high-performance materials.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: