Answers are grounded in this paper and cite their sources.
Carbon (C)-incorporated polysilicon has demonstrated significant potential for enhancing the passivation performance of tunnel oxide passivated contact (TOPCon) structures and the efficiency of solar cells (SCs). However, the viability of this technology for mass production using industrial-grade silicon wafers remains unverified. This study addresses this gap by demonstrating the fabrication of C-incorporated polysilicon via a mass-production-compatible tube plasma-enhanced chemical vapor deposition (PECVD) process. Through optimization of C incorporation ratios and annealing temperatures, the C-incorporated polysilicon structures on M10 wafers demonstrate exceptional passivation and contact properties, achieving the highest implied open circuit voltage (iVoc) of 750 mV, with a low single-sided saturation current density (J0,s) of 1.2 fA/cm2, and a competitive contact resistivity (ρc) of 2.1 mΩ·cm2. Furthermore, an iVoc enhancement of ~1 mV and an implied fill factor (iFF) gain of ~0.2% are demonstrated on mass-production TOPCon precursors, ultimately enabling industrial mass-production TOPCon SCs with C-incorporated polysilicon to feature an average efficiency gain of 0.08% absolute over the C-free baseline, which corresponds to a power gain of ~1.9 W for mainstream 210R modules. This work demonstrates the scalable production of C-incorporated polysilicon via mass-production-compatible tube PECVD, offering a practical approach to enhance the efficiency of industrial TOPCon SCs and demonstrating its significant potential for widespread adoption in the photovoltaic industry.
No takes yet. Share an insight, caveat, or question.
Pu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: