Answers are grounded in this paper and cite their sources.
NiMo/Al 2 O 3 catalysts prepared by impregnation and coprecipitation methods have been compared in catalytic activity for the hydrodesulfurization of dibenzothiophene (DBT) and have been characterized by X-ray diffraction (XRD), Brunauer−Emmett−Teller (BET), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) techniques. The combined results of XRD and XPS indicate that the coprecipitation catalysts contained active β-NiMoO 4 phase while NiAl 2 O 4 and the mixing oxidation state of Mo 6+ and Mo 5+ species were observed on the impregnation catalyst. The formation of β-NiMoO 4 precursor in the unsulfided NiMo/Al 2 O 3 catalyst prepared by coprecipitation is attributed to the enhanced catalytic activity. BET surface area and N 2 adsorption isotherm measurement demonstrate the characteristic of mesopores for the impregnation catalyst and of macropores for the coprecipitation catalyst. SEM images show that the impregnation method partially caused aggregated crystals while coprecipitation produced homogeneous distribution of Ni and Mo active metal species. As compared to the impregnation catalyst, the reaction temperature over the coprecipitation catalyst has been reduced by 40 K at the same DBT conversion (>99.7%). The coprecipitation catalyst is expected to show a superior durability to the impregnation catalyst because of its macroporous structure as well as the decrease in reaction temperature. The remarkable performance of the coprecipitation catalyst results from the formation of β-NiMoO 4 precursor, high concentration of surface active sites, and uniform dispersion of NiMo components through optimizing the mixing between Ni and Mo species.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: