Answers are grounded in this paper and cite their sources.
In this study, high‐entropy oxide (HEO) (Co 0.2 Cu 0.2 Mg 0.2 Ni 0.2 Zn 0.2 )O was synthesized via two different approaches, combustion synthesis (CS) and a solvent‐deficient mechanochemical method (SDM), and comparatively investigated in terms of structural properties, catalytic performance in CO 2 hydrogenation, and environmental impact through phytotoxicity assessment. X‐ray diffraction confirmed the formation of a phase‐pure cubic rock‐salt structure (Fm‐3m) for both synthesis routes. However, the CS‐derived material exhibited a smaller crystallite size, a higher lattice microstrain, and more pronounced structural anisotropy compared to the SDM counterpart, while both materials showed relatively low specific surface areas. Catalytic testing was performed for CO 2 hydrogenation at 20 bar, H 2 /CO 2 = 3, and 200°C–300°C. Both HEO catalysts showed high selectivity toward methanol. The CS catalyst demonstrated markedly superior performance, achieving up to ∼16 mol% CO 2 conversion and significantly higher methanol space‐time yield (4.2 mmol g cat −1 h −1 ) at 300°C compared to the SDM sample. The enhanced activity is attributed to a higher defect density and lattice distortion induced by the combustion route. Environmental assessment using Lemna minor revealed that metal leaching from the HEOs significantly affected phytotoxicity. The CS‐derived material showed higher leaching of Cu, Co, and Ni, highlighting a trade‐off between catalytic activity and environmental stability.
No takes yet. Share an insight, caveat, or question.
Skalar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: