This is the authors' abstract. We don't add key points for this paper.
Gasification is an attractive method to convert lignocellulosic biomass into a combustible gas mixture for electricity and power generation. To control the tar concentration in the produced gas to be within the allowable limit of downstream applications, it is important for a gasification system to be integrated with a tar removal process. In this study, an integrated gasification system consisting of a downdraft gasifier and a secondary catalytic tar‐cracking reactor was designed and tested for the gasification of pelletized oil palm empty fruit bunch. To further purify the producer gas, the system was also integrated with a cyclone, a water scrubber, and a carbon‐bed filter. Biomass was fed at a rate of 5 kg/h, while the air equivalence ratio (ER) and the gasification temperature were set at 0.1 and 800°C, respectively. In total, 5 kg of the specially developed low‐cost Fe/activated carbons (AC) catalyst was used in the hot gas catalytic tar‐cracking reactor. Results indicate that our integrated gasification system was able to produce a clean burnable gas with a lower heating value (LHV) of 9.05 MJ/Nm 3 , carbon conversion efficiency (CCE) of 79.4%, cold gas efficiency (CGE) of 89.9%, and H 2 and CH 4 concentrations of 29.5% and 10.3%, respectively. The final outlet gas was found to only contain 32.5 mg/Nm 3 of tar, thus making it suitable for internal combustion engine (ICE) application.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Malek et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: