Answers are grounded in this paper and cite their sources.
In this study, we present the modeling, scaling, and integration of a thermally actuated microgripper based on a modified Z-beam chevron actuator. An analytical displacement model is developed and validated against numerical simulations and experimental results, showing displacement errors of only 2.86 % for a single beam pair and 3.5 % for eight pairs. To facilitate fabrication and performance validation, the design is scaled up 1:100, resulting in a macro-scale prototype with an experimental displacement of 6 mm, closely matching the simulated 7.9 mm result. Additionally, a miniaturized 50 % scaled version is implemented considering a numerical analysis achieving tip displacements of up to 498.6 μm and forces reaching 883.97 mN under thermal loading. using aluminum 6053. A novel orthogonal configuration of two scaled grippers (TOSG) is introduced to enhance stability and degrees of freedom, achieving a maximum displacement of 1.88 mm and a tip force of 5.76 N, when numerical analysis was performed. Finally, the TOSG is integrated into a structure like a cobot, powered by thermal energy sources in the range of 25–100 °C. Under these operating conditions, numerical analysis yields natural frequency of the modal shapes at 194.97 Hz. This work contributes a validated multi-scale methodology for designing and integrating compliant thermal microgrippers with potential applications in sustainable automation, soft robotics, and smart manufacturing systems powered by residual thermal energy.
No takes yet. Share an insight, caveat, or question.
Vargas et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: