Answers are grounded in this paper and cite their sources.
A method was developed to quantify acetic acid production in ethylene vinyl acetate (EVA) down to 1 ng/g/min, and acetic acid production rates have been determined with and without UV light, and with varying temperatures down to 40°C and up to 125°C; in addition, the influence of humidity was determined. Also, EVA’s from different manufacturers were compared with respect to acetic acid production. In dependence of aging time, two features in acetic acid production were observed: (1.) an initially higher production rate during the first 100 h and (2.) for an EVA from a specific manufacturer a dramatic increase in acetic acid production rate after a certain aging time depending on the aging conditions. The effects of acetic acid within a state-of-the-art crystalline silicon solar cell module are discussed with respect to the acetic acid permeation properties of EVA and the corrosion of Sn and Cu which are common materials used for cell and string connectors as well as the cell metallization.
No takes yet. Share an insight, caveat, or question.
Eiden et al. (2012) studied this question.