Answers are grounded in this paper and cite their sources.
This study investigated semiconductor mineral (natural rutile) as a novel cathodic catalyst for microbial fuel cells (MFCs). Under the experimental conditions, MFCs installed with a natural rutile-coated cathode produced a maximal power density of 12.03 W/m 3 under light irradiation, much higher than that of 7.64 W/m 3 in the dark. The open circuit voltage ( V OCV ) of the MFC was 519 mV when irradiated with visible light, the short-circuit photocurrent density ( I SC ) was 50.91 A/m 3, and the fill factor (FF) was 45.44%. In a separate unoptimized MFC device with a switchable cathode, the maximum power density achieved with natural rutile and platinum (Pt) as a cathode catalyst was comparably at 2.7 and 3.6 W/m 3, respectively. The low “incident monochromatic photon to current conversion efficiency” (IPCE) (0.13% at 420 nm) of rutile used in this study indicates a potential for further material and system improvement. Results from this study demonstrate that natural rutile, and other expected semiconductor materials, may serve as a group of cost-effective alternative catalysts to noble metals in MFC applications.
No takes yet. Share an insight, caveat, or question.
Lu et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: