Answers are grounded in this paper and cite their sources.
In this study, the annual thermal performance and techno-economic analyses of a direct absorption solar collector (DASC) using nanofluids were investigated. According to the results of numerical analysis the difference between the specific heat gains was 126.5 W/m2, where difference for annual energy saving or enhancement for solar energy converting to useful was 224 kW/m2a. To sum up utilization of MWCNTs (0.05%) based nanofluids as heat transfer fluids in PTC supported the 13,5% of thermal efficiency in comparison of water. Furthermore, when nanofluids are used as a heat carrier in a solar collector, the cost of 1 kWh of thermal energy is 0.029 $/kWh, and when water is used, it is 0.034 $/kWh. The payback period of the initial investment amount of the nanofluid solar collector is 3.96 years, where the interest rate of the bank is calculated at 23%, and the payback period of the initial investment amount of the water solar collector is 3.99 years.
No takes yet. Share an insight, caveat, or question.
Juraev et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: