Answers are grounded in this paper and cite their sources.
Achieving anthropomorphic agility in robotic systems remains a fundamental challenge, heavily constrained by the mechanical limitations of conventional serial-link actuators. Current joint architectures suffer from an inherent trade-off between torque density, structural compactness, and kinematic singularity, failing to replicate the complex and coupled spherical motion of biological joints. To bridge this gap, this paper proposes a high-dexterity 3-DoF dexterous joint actuator (JAMS) by in-depth mimicking the bionic advantages of the human hip. Unlike traditional decoupled designs, JAMS introduces a load-adaptive hierarchical actuation strategy that synthesizes power from three parallel motors via customized differential bevel gear and spherical gear trains. This architecture enables omnidirectional rotation around a spatially fixed center, effectively resolving the kinematic redundancy and structural bulkiness of serial equivalents. A comprehensive kinematic model is derived to map the complex gear coupling, facilitating the development of an effectively singularity-free motion control algorithm implemented on a custom dual-MCU embedded controller board. Experimental results demonstrate that JAMS achieves an extensive operational space of 360 ° × 250 °×360° and a theoretical rated torque of 21.5 N·m, exhibiting high torque density within a compact volume. Trajectory tracking experiments verify the actuator’s capability to track selected human hip reference trajectories under scaled-duration gait-cycle conditions, with a composite kinematic-fidelity score of 95.1%, demonstrating its fundamental kinematic feasibility. By integrating multi-drive hierarchical output and spherical rotation mechanism, this work presents a validated mechatronic solution that overcomes long-standing engineering bottlenecks, offering a modularized architecture for multi-DoF robotic joint design, with potential relevance to humanoid robots, robotic arms, and future wearable mechanisms.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: