Answers are grounded in this paper and cite their sources.
Pillars have been used as a means of support since the early days of mining.Pillarsupported mining methods such as bord and pillar require a reliable design system for them to be successful.This paper presents an evaluation of the current hard-rock mining pillar design systems as applied to a practical large-scale narrow-reef platinum mining feasibility study.It is vital to have a dependable pillar design system for economic and sustainable mining.Using an extensive database collected from the project, the pillar strength formulae were tested and several discrepancies noted.This necessitates the establishment of more reliable pillar design systems.In narrow-reef platinum mining, large compressive stresses accompanied by geological and geotechnical factors contribute to pillar instability.A well-formulated pillar design system is required that accounts for such factors so as to minimize pillar failures.A pillar layout design system has to consider the hangingwall, the pillar material, and the footwall as all these three work together for the success of the system.Ozbay, Ryder, and Jager (1995) describe the hangingwall in shallow hard-rock mining situations as a rock mass containing welldefined discontinuities and subjected to deadweight compression.When the hangingwall is unsupported, it becomes susceptible to backbreaks if critical spans are exceeded (Ozbay, Ryder, and Jager, 1995).Different pillars are used in narrow-reef platinum mining, depending on the function the pillar is to serve.In hard-rock tabular mining in general, a combination of pillar types is utilized.Dave (2009) classifies these types as shaft pillars, bracket pillars, boundary pillars, water barrier pillars, barrier pillars, crown pillars, sill pillars, strike-stabilizing pillars, dip-stabilizing pillars, non-yielding pillars, yielding pillars, and crush pillars.Salamon (1983) classified these pillars into three main types -support pillars, protective pillars, and control pillars.He explains that support pillars are usually laid out systematically to offer support to the undermined ground.According to this classification, protective pillars protect surface structures and underground mining excavations or separate one mine from its neighbour, while control pillars are those laid out systematically and cut in deep-level mines to curb rockbursts by reducing energy release rates.Current pillar design systems are based on the empirical determination of pillar design parameters.This approach relies entirely on the failure of pillars for an empirical pillar Reflections on narrow-reef platinum mining pillar design systems as applied to a large platinum exploration feasibility project by T.
No takes yet. Share an insight, caveat, or question.
T. Zvarivadza (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: