Answers are grounded in this paper and cite their sources.
To reduce the environmental impact of coal ash waste, cement-free alkali-activated artificial aggregates were produced from high-calcium bottom ash (BA) and fly ash (FA) using cold bonding technology. This method enhances the recycling of industrial by-products. In this study, alkali-activated artificial aggregates were prepared using BA with FA replacement ratios ranging from 0% to 30%. Sodium silicate (Na 2 SiO 3 ) and sodium hydroxide (NaOH) were used as alkali activators, with a constant alkali solution-to-precursor ratio of 0.36 and Na 2 SiO 3 :NaOH ratio of 1:1. Density, water absorption, void content, pH, crushing load and microstructural characteristics (XRD, SEM, FTIR) were evaluated. Increasing the FA content improved crushing load and density, while reducing water absorption and void content compared with the 100% BA mix. Microstructural and phase analyses suggested the possible formation of alkali-activated aluminosilicate gels. Furthermore, the aggregates containing 20% FA exhibited the highest crushing load and the densest microstructure.
No takes yet. Share an insight, caveat, or question.
Wianglor et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: