Answers are grounded in this paper and cite their sources.
The reliability of ultra-high-pressure fluid control instruments in the oil and gas piping sector is a critical parameter to ensure operational safety and environmental sustainability. This study aims to analyze the torsional mechanical response, angular twist deformation characteristics, and equivalent von Mises stress distribution on a 4-inch Class 1500 RTJ ball valve stem made of UNS S20910 (XM-19 / Nitronic 50) stainless steel during the critical closed-to-open transition phase (breakaway torque). The evaluation was conducted using a combined approach of classical analytical mechanics and multi-step non-linear Finite Element Analysis (FEA) in ANSYS Student 2026R1. Actual material properties obtained from the Material Test Certificate (MTC No. 2023051702) with a yield strength of 435 MPa were incorporated. The analytical results indicated a maximum shear stress of 218.50 MPa, while the FEA simulation (optimum mesh 5.5 mm) recorded a peak von Mises stress of 402.14 MPa (maximum shear stress of 231.85 MPa) concentrated at the keyway fillet transition region. Model validation produced a relative deviation of +6.11%, complying with the ASME V&V 20 criteria (under 10%). The structural integrity evaluation confirmed that the peak stress remained below the yield strength with a Safety Factor of 1.082 (SF > 1.0), satisfying the drive train requirements of API 6D. Although the angular twist deformation of 1.0328° is macroscopically safe, the hydrostatic thrust force (311.17 kN) induces local micro-tilting, which acts as the primary mechanism for scratch formation on the sealing surface.
No takes yet. Share an insight, caveat, or question.
.M et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: