Answers are grounded in this paper and cite their sources.
This study presents the thermal plasma-based process for the simultaneous conversion of carbon dioxide (CO₂) and methane (CH₄), targeting the production of hydrogen (H 2 ) and value-added solid carbon without catalysts. The triple thermal plasma torch system was employed, enabling direct injection of process gases into the high-temperature plasma zone. Three different gas injection configurations were tested: simultaneous CO₂ and CH₄ injection through the co-flow injection nozzle, and separate injections through the co-flow and counter-flow injection nozzles. Simultaneous co-flow injection achieved CO 2 and CH 4 conversion rates of approximately 96.5% and 98.8%, respectively, with H 2 and CO selectivities of 87.2% and 77.3%, respectively. The corresponding specific energy requirement for H 2 production was 159.74 kWh/kg-H 2 . The recovered-carbon yields were 1.55% and 4.66% under conditions 2 and 3, respectively, relative to the total carbon supplied in CH 4 and CO 2 . Carbon flakes with a layered structure were obtained when CH₄ was injected via the co-flow nozzle and CO₂ via the counter-flow nozzle, as characterized by Raman spectroscopy and TEM analysis. Conversely, carbon black-like material was obtained when CO₂ was injected through the co-flow nozzle and CH₄ through the counter-flow nozzle. These results highlight the influence of process gas injection configuration on gaseous product performance, solid carbon recovery, and recovered carbon structure.
No takes yet. Share an insight, caveat, or question.
Ko et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: