Answers are grounded in this paper and cite their sources.
This study investigates how the workpiece inclination angle influences tool life and surface integrity during finish ball-end milling of hardened CR12MoV steel. Experiments were carried out at cutting speeds of 50-110 m/min and inclination angles of 10-75°, while feed per tooth and axial depth remained constant at 0.2 mm/tooth and 0.5 mm. Surface roughness Ra was monitored over the cutting time, and tool life was defined as the point at which the Ra-time curve reached a breakpoint. Increasing the inclination angle shifted the contact zone away from the tool tip, enlarged the effective cutting radius, improved chip formation, and reduced localized wear. As θy increased from 10° to 75°, tool life increased by approximately 60-70% under similar conditions. A second-order logarithmic model also predicted tool life with errors below 6%, offering practical guidance for finish machining of hardened die steels.
No takes yet. Share an insight, caveat, or question.
Tuan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: