Answers are grounded in this paper and cite their sources.
This study investigated the grain refinement-to-coarsening transition in SCM440 steel during multiple quenching, focusing on repeated austenite reformation, carbide dissolution, and grain-boundary migration. Specimens were austenitized at 850 °C for 20 min and water-quenched for one to four cycles (AQ-1–AQ-4), while AH-80 was continuously held at 850 °C for 80 min and quenched once. The prior-austenite grain size decreased from 12.2 ± 4.6 μm in AQ-1 to 8.5 ± 2.5 μm in AQ-3, but increased to 15.2 ± 4.1 μm in AQ-4 and 22.6 ± 5.4 μm in AH-80. EBSD showed that AQ-3 also exhibited the minimum effective grain size of 0.78 μm and the highest average KAM of 1.62°. TEM revealed a progressive reduction in the carbide population observed after quenching, with the projected area fraction decreasing from 7.39% in AQ-1 to 0.23% in AH-80, consistent with progressive carbide dissolution during austenitization. Based on simplified assumptions regarding carbide geometry, volume fraction, and grain-boundary energy, the estimated Zener pinning pressure decreased from 0.429 to 0.045 MPa, while the estimated PZ/PD ratio decreased from 2.616 to approximately 0.51. Despite progressively weakened carbide pinning, grain refinement continued up to AQ-3, indicating that enhanced pinning alone cannot explain the refinement and suggesting an additional contribution from repeated austenite reformation. AQ-3 exhibited the highest yield strength and ultimate tensile strength and Charpy impact energy, whereas subsequent grain coarsening reduced the mechanical performance. These findings are consistent with a possible competition among repeated austenite reformation, residual-carbide pinning, and grain-boundary migration, although further time-resolved investigations are required to validate their relative contributions.
No takes yet. Share an insight, caveat, or question.
Choi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: