This is the authors' abstract. We don't add key points for this paper.
Polyacrylonitrile (PAN)-based carbon fibers (CFs) suffer from surface flaws including microcracks, irregular roughness, and residual sizing that act as stress concentrators and limit their tensile performance. To address this issue, we introduce an electrochemical etching process that selectively removes surface defects while preserving the internal crystalline structure. The laboratory-fabricated CF (BSCFs) and two commercial CFs (T800 and T1000) were treated in ammonium bicarbonate electrolyte at 0.12 A/m 2 under ambient conditions for 1 to 15 min. AFM, SEM, Raman spectroscopy, XRD, and XPS confirmed the elimination of silicon-based residues originated from PAN precursor fibers and significant reductions in surface roughness of ∼75% for BSCFs, ∼65% for T800, and up to ∼90% for T1000 without changes in interlayer spacing, defect ratio, or density. These improvements translated directly into higher mechanical performance. T1000 showed strength increases of ∼24% (from 6.3 ± 0.6 to 7.8 ± 0.6 GPa) and modulus increases of ∼21% (from 294.1 ± 20.1 to 355.7 ± 23.8 GPa), respectively. Finite element simulations further reveal that surface roughness induces stress concentration, leading to premature failure, whereas electrochemical etching effectively alleviates these stress concentrations, thereby enhancing the tensile performance. These values are comparable to the world best performance CF such as T1200 (tensile strength of 8 GPa and modulus of 315 GPa). In addition, the interfacial shear strength increased to 43.3 ± 2.9 MPa for T1000, corresponding to improvements 4.4% relative to unetched fibers. Overall, this work demonstrates electrochemical etching as a practical, scalable, energy-efficient approach to high-performance CFs.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: