Answers are grounded in this paper and cite their sources.
Multiangular measurements were made on urban surface materials (e.g., roof coverings) using the European Goniometer Facility (EGO) in Ispra, Italy. The intention is to analyze polarization effects in multiangular reflection data under controlled illumination conditions. In this study we determine the accuracy of the measurements. A HeNe laser at wavelength λ = 632.8 nm as illumination source and a spectroradiometer with a mounted polarizer as detector were used. We discuss different detector characteristics and determine the contributions of different error sources (for example noise or uncertainty of adjustments). The results of the calculation led to a relative accuracy of the reflectance values of ∼ 4.3% for the given setup. Measured reflectance values for 4 polarization states are presented for 3 samples (Spectralon, roof tile, and roof paper) in particular results describing the data of the roof tile by a model of Torrance and Sparrow. The model is able to describe the specular reflection for like‐polarization measurements. It describes the strong specular behavior at ss‐polarization as well as the much weaker specular reflection at pp‐polarization which are both shifted to large viewing zenith angles. Using different coefficients to describe the contribution from the diffuse component, relative deviations between measurements and model are about 11 % on average. Cross‐polarization measurements are approximately Lambertian with deviations of ∼ 5% on average.
No takes yet. Share an insight, caveat, or question.
Rothkirch et al. (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: