Answers are grounded in this paper and cite their sources.
In metastable austenitic stainless steels with low stacking fault energy (SFE), a two-step athermal martensitic transformation, FCC (γ) → HCP (ε) → BCC (α’), occurs during cooling to cryogenic temperatures. In this study, to explore the practical low-temperature applications of Fe–18%Cr–8%Ni type 304 austenitic stainless steels, we separately evaluated the effects of dislocation introduction by pre-straining of austenite on the first-step γ→ε transformation and the second-step ε→α’ transformation and investigated the thermal stability of pre-strained low-SFE austenite. With pre-straining above the Md temperature (773–1273 K), the dislocation density in austenite increased and reached a saturation value of approximately 1.5×10 15 m -2 after 15% pre-rolling, irrespective of the pre-strain temperature. In-situ magnetization measurements during cooling revealed that the transformation start temperature of α’-martensite, , decreased with increasing dislocation density in austenite, demonstrating pronounced “mechanical stabilization”. The role of the intermediate ε-martensite in this stabilization was examined via in-situ neutron diffraction measurements during cooling. The results showed that the γ→ε transformation was markedly suppressed by pre-straining, whereas the ε→α’ transformation started immediately after the onset of the γ→ε transformation, regardless of the application of pre-straining. These results indicate that the contribution of the ε→α’ transformation to the suppression of α’-martensite formation by pre-straining is negligible. Because the γ→ε transformation occurs through the arrangement of Shockley partial dislocations on every other {111} γ plane, immobile dislocation cells and dislocation debris introduced by pre-straining likely hinder their motion, thereby suppressing the γ→ε transformation and consequently lowering .
No takes yet. Share an insight, caveat, or question.
Masumura et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: