Answers are grounded in this paper and cite their sources.
This study presents the development of a water-resistant cellulose-based film for potential food packaging applications. Previous work has demonstrated that carboxymethylated cellulose films (CCF) made from mildly carboxymethylated cellulose fibers (CMF) possess excellent mechanical properties but exhibit high water absorption (WA) and water vapor permeation (WVP). In this work, the WA and WVP characteristics of CCFs are reduced by acetylation to better suit specific packaging needs. CCFs were first prepared by flow casting in an acid bath, followed by acetylation using acetic anhydride at room temperature to impart water resistance to the film surface. The success of the acetylation reaction was confirmed through Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and Nuclear Magnetic Resonance (NMR) spectroscopy. Characterization of WA, WVP, and water contact angle revealed promising results; notably, moisture absorption (MA) decreased from 59.6% to approximately 4.7% after acetylation, while WVP decreased from a low-barrier regime (∼200 g m −2 day −1 for CCF) to a medium-barrier level (∼75 g m −2 day −1 for acetylated CCF (ACCF)). This behavior is attributed to the balance between reduced hydrogen bonding and the formation of acetyl-rich surface domains. Although the removal of hydrogen bonds slightly compromised the mechanical properties, the ACCFs retained good tensile strength after water immersion, outperforming CCFs, while exhibiting a significant reduction in transparency and a moderate improvement in WVP, which restricts its application. Overall, the acetylation process effectively enhances the water resistance of CCFs, thereby broadening their potential applications in food packaging.
No takes yet. Share an insight, caveat, or question.
Jiang et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: