Answers are grounded in this paper and cite their sources.
The friction factor and heat transfer rate of CuO-water and GO-water nanofluids on a backward-facing step (BFS)channel with trapezoidal corrugated walls and obstacle are experimentally studied by forced convection. Nanoparticles of CuO and Graphene were dispersed in water at volume concentrations of 0.1-1.0%. Tests were performed in turbulent flow in the Reynolds number range from 5000 to 20,000 at uniform heat flux of 40 kW/m². Nusselt number (Nu) increases with Re and concentration of nanoparticles. At Re = 20,000 and the concentration of 1.0% of nanofluid, the Nu of graphene-water nanofluid was 194, which is about 17% greater than that of water; meanwhile, the Nu of CuO-water nanofluid was 185 which is better than water by 12%. The friction factor also increased with nanoparticles loading and they obtained about ~35% higher and ~40% higher than water for CuO and graphene, respectively at Re = 5000. At low Re, the maximum performance evaluation criterion (PEC) of 0.5% graphene and 1% CuO was 1.74 and 1.58%, respectively, confirming the high thermal-hydraulic performance of graphene in the BFS channel.
No takes yet. Share an insight, caveat, or question.
Sarhan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: