Answers are grounded in this paper and cite their sources.
This study presents a low-cost Internet of Things (IoT)-based antenna-measurement system that integrates automated dual-axis positioning, mobile data visualization, antenna-related calculations, and data export within a unified platform. The system employs a NodeMCU ESP8266, Arduino Uno R3, servo-driven θ- and ϕ-axis positioning mechanism, NETPIE IoT communication, and a mobile application, while a FieldFox vector network analyzer is used for RF measurements. Positioning performance was evaluated at angular steps of 4°, 5°, 6°, and 10° under unloaded and antenna-loaded conditions. Across all 16 test conditions, the maximum positioning error did not exceed 0.3°, remaining below the predefined ±1° requirement. The far-field distance and antenna-gain calculation functions were also validated against independently calculated theoretical reference values, with gain differences arising only from two-decimal-place display rounding. Radiation-pattern measurements at 2.4 GHz using dipole and Yagi–Uda antennas demonstrated the expected approximately omnidirectional H-plane response of the dipole and the more directional response of the Yagi–Uda antenna. Comparison with CST simulations and ME1300 reference measurements showed agreement in the principal radiation characteristics, including main-lobe direction and overall pattern behavior. The developed system provides an accessible platform for antenna radiation-pattern measurement, with future development focused on automated RF data acquisition.
No takes yet. Share an insight, caveat, or question.
Phunklang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: