This is the authors' abstract. We don't add key points for this paper.
The construction sector’s dependence on carbon-intensive binders and synthetic reinforcement has intensified interest in plant-based fibers as sustainable crack-control reinforcement for concrete. This study experimentally characterises the fresh and 28-day mechanical properties of hemp (Cannabis sativa bast) fiber-reinforced concrete (HFRC) and develops a multi-output Artificial Neural Network (ANN) that predicts its compressive, splitting tensile and flexural strength from fiber dosage. The physical programme comprised eleven dosage levels (0–2.0% by volume in 0.2% steps) of 5% NaOH-treated fiber (aspect ratio ≈ 235) in a fixed M30 base mix (cement 340 kg/m³, water–cement ratio 0.45, superplasticizer 7.48 kg/m³). Slump, compaction factor and Vee-Bee time were measured in triplicate, and three cubes, cylinders and prisms per mix were tested to IS 516; dosage effects were assessed by one-way ANOVA with Tukey and Dunnett comparisons. The 33 physical specimen results per property were kept distinct from 1,100 augmented rows generated from truncated-normal distributions bounded by each mix’s measured mean, standard deviation and range. A 64–32 ReLU multi-output perceptron was evaluated by leave-one-dosage-out cross-validation over ten seeds and benchmarked against polynomial, spline, ridge, tree-ensemble and single-output models. Fiber dosage significantly affected all three strengths ( p < 0.001). Compressive strength peaked at 0.6% (32.8 MPa, + 5.8%), statistically indistinguishable from 0.4 to 0.8%, while splitting tensile and flexural strength peaked at 1.2% (3.95 MPa, + 33.9%; 5.50 MPa, + 31.0%) within statistically equivalent plateaus. On unseen dosages the ANN reproduced the experimental means with RMSE of 0.36, 0.09 and 0.13 MPa, respectively, and outperformed three single-output networks, although a cubic smoothing spline was equally or more accurate. Slump fell from 95 mm to 40 mm and Vee-Bee time rose from 3 s to 20 s across the dosage range, confirming a workability–reinforcement trade-off. The results support hemp fiber dosages of about 0.6–1.2% and show that, for a single-variable dosage study, the multi-output ANN is best used as an exploratory response-curve model rather than as a substitute for physical testing.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Rajkumar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: