Answers are grounded in this paper and cite their sources.
Correlations between the standard penetration test blow count (SPT-N) and shear wave velocity (Vs) are widely used for seismic site classification of buildings, but their transferability to new sites is rarely tested. A database of 2666 SPT-N–Vs pairs from 13 studies in six countries was compiled and screened to 2045 pairs in four soil groups. Eighty-two published equations were re-evaluated, bias-corrected power-law equations were developed, and country–method correction factors and thirteen machine learning models were benchmarked under random 10-fold and leave-one-source-out validation. Under leave-one-source-out validation, a pooled SPT-N-only power law (RMSE = 53.5 m/s) and the group-specific power law (54.8 m/s) were the most transferable of the benchmarked models, correction factors did not improve transfer to withheld sources, and the machine learning models, including those tuned with source-grouped validation, did not improve on them. A mixed-effects analysis showed that 54–71% of the variance in the clay, silt and sand groups arises from differences between studies. More than half of the layers with reported Vs < 180 m/s were predicted as NEHRP class D, and the Vs30 uncertainty corresponds to about 10–26% for the assumed multi-layer profiles in long-period site amplification. For new sites, σlnVs ≈ 0.22–0.25 is recommended, while direct Vs measurements remain necessary for design.
No takes yet. Share an insight, caveat, or question.
Subaşı et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: