Answers are grounded in this paper and cite their sources.
Poly(3,4-ethylenedioxythiophene) (PEDOT) thin films are promising transparent conductors for electrodes and represent a potential alternative to indium tin oxide (ITO), which is costly and depends on critical raw materials. Optimizing PEDOT properties through careful control of processing parameters is essential for tailoring structure–property relationships in next-generation electronic devices. This study systematically investigates the influence of the oxidant-to-monomer ratio (OMR) on PEDOT films deposited by oxidative chemical vapor deposition (oCVD). The monomer 3,4-ethylenedioxythiophene (EDOT) and the oxidant antimony pentachloride (SbCl 5 ) were used. By varying only the SbCl 5 /EDOT vapor-phase ratio while keeping the deposition temperature (150 °C) and film thickness (∼100 nm) constant, the effect of OMR on film morphology, molecular structure, and electrical properties was isolated. Films deposited at lower OMR values (0.1) exhibited higher electrical conductivity, attributed to reduced structural disorder. These effects were further confirmed in diode devices fabricated on both rigid and flexible substrates. PEDOT films deposited at an OMR of 0.1 produced bottom electrodes with superior electrical performance, demonstrated by higher current density and improved rectification ratio. The PEDOT films were also integrated into printed flexible zinc oxide (ZnO) Schottky diodes, achieving good rectification ratios and favorable ideality factors. Overall, the results demonstrate that the oxidant-to-monomer ratio is a critical parameter for tuning PEDOT film properties. This approach enables the fabrication of PEDOT electrodes with application-specific electronic characteristics, supporting their use as potential ITO alternatives while facilitating scalable vapor-phase processing for flexible electronic devices.
No takes yet. Share an insight, caveat, or question.
Batista et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: