Answers are grounded in this paper and cite their sources.
Solid-state Friction Stir Additive Manufacturing offers a melt-free route to produce high-strength aluminum alloys by avoiding the solidification defects that limit conventional fusion-based AM. In this study, AA7050 was deposited by AFSD and subsequently subjected to hot isostatic pressing to eliminate the effects of defects/pores and unbonded regions on tensile behavior. As-deposited AFSD AA7050 retained most of the wrought tensile strength (UTS ≈ 404–468 MPa, versus ≈ 507 MPa for wrought AA7050) and exhibited comparable hardness (~ 175 ± 5 HV), yet failed with ~ zero uniform elongation compared with ~ 19% for the wrought AA7050. EBSD revealed a clear layer/interlayer hierarchy comprising coarse, elongated grains in the layer interiors and ultra-fine equiaxed grains concentrated in reheated interlayers. XRD showed an α-Al-dominated matrix in AFSD with the absence of discrete second-phase reflections. Fractography, however, demonstrated that macroscopic embrittlement was primarily governed by large pores and lack-of-bond defects at interlayer boundaries. Cracks initiated and propagated along these defects, while regions between them exhibited shallow dimples, characteristic of ductile micro-void coalescence in AA7050. Hot Isostatic Pressing (HIP) removed the large defects and homogenized the microstructure, but also severely coarsened the η′/η precipitates. Consequently, HIPed AFSD AA7050 exhibited reduced strength (UTS ≈ 316–324 MPa) but showed improved ductility (~ 18–19% elongation) comparable to the wrought AA7050. The results quantitatively demonstrate a strong trade-off between defect elimination and precipitation, and highlight that AFSD process design for AA7050 must simultaneously control porosity, interlayer bonding, and precipitate stability to achieve wrought-like strength–ductility combinations without over-reliance on aggressive HIP treatments.
No takes yet. Share an insight, caveat, or question.
Joshi et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: