This is the authors' abstract. We don't add key points for this paper.
Purpose Piles built before an approach embankment on compressible clay are dragged down as the clay consolidates. The unified method gives the long-term dragload and neutral plane from an assumed toe stiffness and fully mobilised shaft shear, and says nothing about time. This study measures what those assumptions cost for a pile through high-plasticity clay over low-plasticity clay. Methods A 0.6 m by 18 m pile carrying 600 kN beneath a 3 m embankment (54 kPa) was analysed with the unified method and with a coupled finite-element consolidation model with a frictional interface. The clay was modelled as equivalent elastic and as Modified Cam Clay, with consolidation followed for 600 years. The model was checked against an independent one-dimensional solution and four meshes; twelve variations were run. Results Final dragload was 444 kN with Modified Cam Clay and 459 kN with elastic clay, against 801 kN from the unified method; the neutral plane lay at 12.6 and 13.5 m instead of 14.25 m. About 166 kN of the gap came from toe stiffness and 180 kN from partial mobilisation over a 9 m transition zone. Dragload lagged settlement: at 34% consolidation the pile carried 19% of its final dragload. With a draining bearing stratum, 61% arrived within the first year. Conclusion With inputs consistent with the model, the rigid-plastic method located the neutral plane within about 0.2 m but overestimated the dragload by 32 to 41%. Toe response and drainage of the bearing stratum controlled magnitude and timing more than interface strength did.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Henrry Bazán (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: