Answers are grounded in this paper and cite their sources.
In order to enhance their gas-sensing capabilities for NH 3 and NO 2 , this study demonstrates the creation and assessment of pure SnO 2 and Cu-doped tin oxide (SnO 2 :Cu) nanostructured thin films produced using the spray pyrolysis process. At 350°C, the films were formed on glass substrates with a precursor molar concentration of 0.02 M and copper doping ratios of 1%, 3%, and 5%. X-ray diffraction (XRD) research confirmed that there are no signs of secondary phases and that all films have a polycrystalline tetragonal rutile structure. The size of the crystallites decreased slightly as the Cu content rose. AFM and SEM investigations show that copper doping improved the effective surface area by increasing surface uniformity and significantly reducing grain size and surface roughness. EDS analysis demonstrated the effective copper assimilation and the lack of contamination. Due to quantum confinement effects, optical tests revealed that the direct band gap increased from 3.73 eV for undoped SnO 2 to 3.88 eV for 5% Cu-doped films. Hall effect results showed that the doping increased the quantity of carriers and that all of the films had n-type conductivity. The SnO 2 film containing 1% Cu performed the best, according to gas-sensing evaluations, with maximum sensitivities of 19.12% toward NH 3 and 96.14% toward NO 2 at an operating temperature of 200°C, as well as quick response and recovery times. These findings demonstrate that appropriate Cu doping may increase SnO 2 thin-film gas-sensing capabilities by increasing surface activity and p–n junction formation.
No takes yet. Share an insight, caveat, or question.
Mohammad et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: