Answers are grounded in this paper and cite their sources.
Sea dikes exhibit numerous discontinuities due to material and geometric transitions. In the past, these transitions have often led to initiation of damage and even dike failure as they are weak points in the overall dike surface. This experimental study systematically investigates eight different landside slopes, focusing on vertical and horizontal material transitions and their hydraulic stability against overflow. The test variations include different construction methods and building materials, with the ultimate objective of improving transitions from hard to soft materials to reduce erosion. The results show that erosion first initiates at transitions and from there, progressively develops into the slope body, indicating that these areas are erosion-prone. For every model setup tested, changes to construction and other measures, such as the use of erosion control materials and other structural measures, resulted in higher erosion resistance, and the failure criteria were ultimately reached after overflow unit discharges of ∼250 l/(s*m) for vegetated dikes with reinforcement measures. Implementing a 3D mesh mat combined with non-woven geotextile proved effective in strengthening transitions and increasing discharge capacity by more than four times for vertical transitions and up to three times for horizontal transitions compared to no improvement measures. The performance of the reinforcement techniques is evaluated, allowing recommendations to be derived for suitable layouts, material combinations, and construction methods to optimize and strengthen future practical designs of transitions on sea dikes.
No takes yet. Share an insight, caveat, or question.
Schulte et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: