Answers are grounded in this paper and cite their sources.
This study investigates damage initiation and progressive failure evolution in perforated hybrid composite laminates with engineered negative (auxetic) and positive Poisson's ratios through a combined experimental and numerical approach. To isolate the influence of laminate architecture, two hybrid laminates with identical constituent materials, nominal fiber volume fractions, and laminate thicknesses were fabricated while varying only the stacking sequence. Progressive damage evolution was simulated in ABAQUS using a Hashin-based failure model and validated against experimental open-hole tensile tests. The results show that auxetic laminates experience earlier matrix tensile damage initiation but exhibit a more gradual and spatially distributed damage evolution than conventional laminates. Consequently, damage localization around the hole is reduced, leading to improved stress redistribution and delayed structural degradation. Experimental results indicate that the auxetic laminate achieved approximately 7.5% higher load-carrying capacity and retained nearly 20% of its peak load after catastrophic failure, whereas the conventional laminate retained less than 10%. Layer-wise damage analysis further reveals that failure in auxetic laminates initiates within low- and intermediate-angle plies and propagates progressively through the laminate thickness, whereas conventional laminates exhibit rapid damage localization dominated by 90° plies. Overall, the results demonstrate the potential of auxetic layup architectures to improve damage tolerance, promote progressive failure, and enhance post-peak load-carrying capability in perforated hybrid composite laminates.
No takes yet. Share an insight, caveat, or question.
Hosseini‐Toudeshky et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: