Answers are grounded in this paper and cite their sources.
Yarn properties are influenced not only by fibre material but also by yarn structure, which is determined by spinning technology and processing conditions. Air-jet spun yarns exhibit a distinctive core-wrapper structure, where a fibre ribbon is helically wrapped around the core. Wrapper fibres significantly influence yarn performance; thus, determining their percentage is essential for modelling yarn behaviour. However, conventional cross-sectional image analysis methods are often inaccurate and subjective. This paper presents a novel method for identifying wrapper and core fibres in air-jet spun yarn, based on which the percentage of wrapper fibres is subsequently calculated. Unlike the subjective approaches proposed in previous studies, this direct method and its modification eliminate subjectivity by classifying fibres into core and wrapper layers using objective, rule-based geometric criteria. The proposed methodology was evaluated using lyocell air-jet spun yarns spun at three levels of spinning nozzle spacing (the distance between the front roller nip line and the spinning tip inlet). Concurrently, the effects of this parameter on yarn packing density, tenacity, breaking elongation, and hairiness were investigated, alongside the correlation between wrapper fibre percentage and these properties. The results showed a wrapper fibre percentage of approximately 30%, consistent with the literature, with the highest proportion observed at the shortest spinning nozzle spacing. While packing density was not statistically significantly affected, yarn mechanical properties exhibited a non-linear dependence; both tenacity and elongation initially increased with a higher wrapper fibre percentage but decreased after exceeding a critical threshold. Ultimately, a longer spinning nozzle spacing increased yarn tenacity and elongation while decreasing hairiness.
No takes yet. Share an insight, caveat, or question.
Mertová et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: