Answers are grounded in this paper and cite their sources.
Corrosion-resistant pipes operating under internal pressure are critical components in chemical, energy, and petrochemical industries, where reliability and long-term performance are essential. The present study aims to provide an integrated assessment of material selection and structural performance for pipelines operating in aggressive environments. Austenitic stainless steel AISI 316L was selected based on its superior resistance to chloride-induced corrosion, good weldability, and stable mechanical properties. The required wall thickness was determined analytically using the thin-walled cylinder approach, considering operational pressure and safety factors. To validate the design, a three-dimensional finite element model was developed in Autodesk Inventor, incorporating realistic geometry, welded joints, and boundary conditions. The results show that the calculated wall thickness of 3.76 mm ensures safe operation at an internal pressure of 6 MPa. Finite element analysis revealed that the maximum equivalent stress does not exceed 128 MPa, with a minimum safety factor of 1.56. The maximum displacement was found to be less than 0.1 mm, indicating high structural stiffness and stability. Stress concentrations were localized in geometrically complex regions; however, they remained within allowable limits. The novelty of the study lies in the combined application of analytical and numerical approaches for the validation of pipe design under combined mechanical and environmental loading. The proposed methodology provides a reliable framework for the design and optimization of corrosion-resistant pipelines, ensuring safety, durability, and cost-effectiveness in aggressive operating conditions.
No takes yet. Share an insight, caveat, or question.
Rott et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: