Answers are grounded in this paper and cite their sources.
Objectives. The work set out to develop an alternative technology for processing polyisocyanurate (PIR) foam waste in the production of panels. The technology had to fulfill the following conditions: reduction of environmental impact (reduction of the amount of waste to be disposed of), partial or complete recovery of production waste, and the use of available methods and materials. Methods. The study of the obtained products of waste recovery of PIR plates was carried out via potentiometric and viscometric methods, as well as infrared spectroscopy using a frustrated total internal reflection unit. The water content in the samples was determined using an automatic titrator according to the K. Fisher method with a coulometric cell. The characteristics of PIR foams using the recuperate were obtained on the Foamat foam analyzer. Results. A technology for the chemical destruction of a mesh polymer structure by glycolysis with low-molecular-weight diols has been proposed. Low-molecular-weight hydroxyl-containing liquid oligomers have been obtained. The waste from the production of PIR panels in the form of crumbs was depolymerized with diethylene glycol at a temperature of 200–210°C at atmospheric pressure in the presence of potassium octoate as a catalyst. The work also considered the complete cycle of waste recovery from PIR panels. The PIR crumb recuperator was tested to demonstrate the possibility of using this technology under industrial conditions. Conclusions. A confirmation of the viability of the proposed method of waste recovery from PIR panels is provided by successful industrial tests. However, despite this demonstration, the theory is not complete and should be further investigated in terms of selecting optimal conditions, such as catalysis, temperature regimes, and synthesis time.
No takes yet. Share an insight, caveat, or question.
Noskov et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: