Answers are grounded in this paper and cite their sources.
Low efficiency in organic light-emitting diodes (OLEDs) is often blamed on charge balance, yet the device models that could test this are rarely converged or constrained by measured inputs. We solve converged drift–diffusion, transfermatrix and dipole models for three deep-blue thermally activated delayed fluorescence (TADF) phosphine-oxide hosts, S1, S3 and S4, with an open solver verified against a converged commercial reference, and we constrain every hostspecific input by measurement: film optical constants from ellipsometry, film photoluminescence, voltammetric host levels and host transport fitted to quality-gated single-carrier current–voltage data. In every converged model OLED with the fitted transport, and also with a shallow-trap transport alternative and with offsets across their identifiable range, charge balance and host confinement are not the limit. What decides the efficiency is where the recombination zone sits: moving it from the electron-transport interface into the host raises the computed air outcoupling about threefold. The model-conditioned efficiency ceiling is therefore set by zone placement and by the photoluminescence quantum yield, which also fixes the host ranking S1>S4≳S3, and transport engineering becomes an outcoupling lever. Two measurements, thickness-dependent current–voltage and angle-resolved photoluminescence, would pin the remaining model ranges (all device quantities are model outputs).
No takes yet. Share an insight, caveat, or question.
Dash et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: