Answers are grounded in this paper and cite their sources.
High-Concentration Photovoltaic (HCPV) systems operate under high heat fluxes, onthe order of MW/m2 , requiring effective thermal management. Experimental studies ofminichannel cooling for HCPV seldom extend from the laboratory to complete modulesoperating outdoors. This study experimentally evaluates seven water-cooled minichannelheat exchangers at three scales: a laboratory setup with electrical cartridge heating, outdoorsingle-cell monomodules, and complete 25-cell modules. Six were micromachined inaluminum, and one was manufactured in a cobalt–chromium–tungsten (CoCrW) alloyby Direct Metal Laser Sintering (DMLS). The total thermal resistance ranged from 0.24 to0.84 °C/W, while pressure drops remained below 2 kPa at 60 mL/min. An empiricalNusselt number correlation for the tested straight-channel heat exchangers (22 ≤ Re ≤ 107)predicted 96% of the experimental data within ±30%. Under outdoor operation, thetwo modules, one equipped with the aluminum heat exchangers and the other with theCoCrW heat exchangers, achieved electrical efficiencies of 23.02% and 22.01% and combinedefficiencies of 43.62% and 42.33%, respectively, with cell temperatures between 40 and50 °C. The exergy content of the recovered thermal energy was 2–3%, so the module exergyefficiency of approximately 25% was determined mainly by the electrical output. Overall,the results demonstrate the potential of minichannel heat exchangers for simultaneousthermal and electrical energy recovery in HCPV modules.
No takes yet. Share an insight, caveat, or question.
Moreira et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: