Answers are grounded in this paper and cite their sources.
The reliability of grout in a precast concrete approach is vital for structural reliability, durability, and effective load transmission in precast concrete elements. Typical methods for evaluating grout flow monitoring and flow performance tend to be imposing, time-laborious, and inappropriate for real-time monitoring. In this research, the internal grout flow and its performance monitoring along the horizontal direction in precast elements were investigated using one of the non-destructive testing approaches, namely, the thermal image processing method. A cementitious grout of M 40 grade was used in the study. Its viscosity was estimated using the Marsh cone test and used as an apparent equivalent Newtonian viscosity in a first-order Hagen-Poiseuille estimate of grout flow behaviour. Concrete beams of size 500 mm × 120 mm × 100 mm were fabricated with horizontal ducts of diameter 25 mm diameter in the middle. The ducts were embedded with pipes of different materials such as steel, HDPE, and PVC. One of the ends of the duct was sealed, and the grout was injected from the other end. The real-time thermal images of grout flow during injection and after it had set were captured using FLIR E75 infrared thermal camera to evaluate the internal grout flow and the grout performance. The beams were heated for 45 min and then cooled for 90 min to assess the grout condition and to detect the location of voids, if any, in different zones (zone 1 -5 at an interval of 100 mm). The duct with PVC pipe exhibited better thermal visualization than steel and HDPE pipes, and zone-wise thermal analysis detected void contents of 0% in Zones 1, 2 and 5, 7.00% in Zone 3, and 24.67% in Zone 4 (average of three beams), demonstrating the method’s ability to localize internal voids under controlled laboratory conditions. The destructive sectioning of the PVC Zone 4 provided 17.5% voids which satisfactorily validated the thermal based assessment. These results indicate the potential of thermal imaging as a non-destructive assessment tool for grout compactness in precast construction.
No takes yet. Share an insight, caveat, or question.
Balakumar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: