Answers are grounded in this paper and cite their sources.
The increasing thermal and power-density requirements of modern electronic systems create a growing demand for joining technologies that provide high electrical and thermal conductivity, sufficient mechanical stability, and reduced process complexity. This study investigates a paste-free approach for direct Cu/Cu joining using laser-structured copper surfaces. A kinematic surface simulation was used to identify laser parameter combinations that generate pronounced microstructured topographies. Two structure variants with different lateral feature sizes and surface-enlargement factors were subsequently produced and joined under heat and pressure without a filler metal, sintering paste, or permanent intermediate layer. The resulting surfaces and joints were characterized by optical microscopy, scanning electron microscopy, laser scanning microscopy, cross-sectional analysis, fracture-surface examination, and preliminary adapted die-shear testing. Apparent shear strengths of approximately 16 and 35 MPa were obtained for structure variants I and II, respectively. Variant II exhibited finer and more densely distributed features, a larger surface-enlargement factor, and a more continuous interfacial contact morphology. The results indicate that laser-generated microstructures can support paste-free direct Cu/Cu joining and that the lateral distribution of the surface features is an important factor in joint formation.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: